商品説明


★初期化済みです。
★現状の写真の製品を送ります。
（品につきスレ等ご容赦くださいませ。）

付属品： 無
（電源コードやその他付属品は一切ありません）

----------------------------------------------------------------------------

WLCNG Boot Loader Version 1.0.20 (Built on Jan 14 2014 at 11:40:45 by cisco)
Board Revision 1.3 (SN: FCW1709L04C, Type: AIR-CT5508-K9) (G)

Verifying boot loader integrity... OK.

OCTEON CN5645-NSP pass 2.1, Core clock: 600 MHz, DDR clock: 330 MHz (660 Mhz data rate)
FPGA Revision 1.7
Env FW Revision 1.8
USB Console Revision 2.2
CPU Cores: 10
DRAM: 1024 MB
Flash: 32 MB
Clearing DRAM........ done
Network: octeth0", octeth1
" - Active interface
E - Environment MAC address override
CF Bus 0 (IDE): OK
IDE device 0:
- Model: STEC M2T CF 1.0.0 Firm: K1367MIX Ser#: STIM2M0113014065939
- Type: Hard Disk
- Capacity: 977.4 MB = 0.9 GB (2001888 x 512)


Press now to access the Boot Menu...

Loading primary image (8.5.140.0)
100%

38645854 bytes read
Launching...
init started: BusyBox v1.6.0 (2010-05-13 17:50:10 EDT) multi-call binary
starting pid 847, tty "": "/etc/init.d/rcS"
Decompressing... OK
Validating...... OK
Set PLX switch MPS settings .............!!!!!!!
Generating Secure Shell DSA Host Key ...
Starting DB Services...
Starting Web Services ...
Generating Secure Shell RSA Host Key ...
Generating Secure Shell version 2 ECDSA Host Key ...
Detecting Hardware ...
set smp_affinity for irq 48
003f
DP from CGE5.0 ...
Starting NA Connector...
starting pid 1225, tty "/dev/ttyS0": "/usr/bin/gettyOrMwar"
Setting up ZVM
Exporting LD_LIBRARY_PATH

Cryptographic library self-test....
Testing SHA1 Short Message 1
Testing SHA256 Short Message 1
Testing SHA384 Short Message 1
SHA1 POST PASSED
Testing HMAC SHA1 Short Message 1
Testing HMAC SHA2 Short Message 1
Testing HMAC SHA384 Short Message 1
passed!

XML config selected
Validating XML configuration
octeon_device_init: found 1 DPs
readCPUConfigData: cardid 0x6070001
Cisco is a trademark of Cisco Systems, Inc.
Software Copyright Cisco Systems, Inc. All rights reserved.

Cisco AireOS Version 8.5.140.0
Firmware Version FPGA 1.7, Env 1.8, USB console 2.2
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Initializing Licensing Services: ok
Starting Statistics Service: ok

License daemon start initialization.....

License daemon running.....
Starting Licensing Services: ok
Starting ARP Services: ok
Starting Trap Manager: ok

Starting Data Externalization services: ok
Starting Network Interface Management Services: ok
Starting System Services: ok
Starting FIPS Features: ok : Not enabled
Starting SNMP services: ok
Starting Fastpath Hardware Acceleration: ok
Starting Fastpath Console redirect : ok
Starting Fastpath DP Heartbeat : ok
Fastpath CPU0.00(0): Starting Fastpath Application. SDK-Cavium Networks Octeon SDK version 1.8.0, build 269. Flags-[DUTY CYCLE] : ok
Fastpath CPU0.00(0): Initializing last packet received queue. Num of cores(10)
Fastpath CPU0.00(0): Initializing Global Packet Queue. Num of packets supported(1)
Fastpath CPU0.00(0): Init MBUF size: 1856, Subsequent MBUF size: 2040
Fastpath CPU0.00(0): Core 0 Initialization and FIPS self-test: ok
Fastpath CPU0.00(0): 10 Cores are being initialized
Fastpath CPU0.00(0): Initializing Timer...
Fastpath CPU0.00(0): Initializing Timer...done.
Fastpath CPU0.00(0): Initializing Timer...
Fastpath CPU0.00(0): Initializing NBAR AGING Timer...done.
Fastpath CPU0.00(0): Received instruction to get link status
Fastpath CPU0.01(0): Core 1 Initialization and FIPS self-test: ok
Fastpath CPU0.02(0): Core 2 Initialization and FIPS self-test: ok
Fastpath CPU0.03(1): Core 3 Initialization and FIPS self-test: ok
Fastpath CPU0.04(2): Core 4 Initialization and FIPS self-test: ok
Fastpath CPU0.05(3): Core 5 Initialization and FIPS self-test: ok
Fastpath CPU0.06(4): Core 6 Initialization and FIPS self-test: ok
Fastpath CPU0.07(5): Core 7 Initialization and FIPS self-test: ok
Fastpath CPU0.08(6): Core 8 Initialization and FIPS self-test: ok
Fastpath CPU0.09(7): Core 9 Initialization and FIPS self-test: ok
Starting Switching Services: ok
Starting QoS Services: ok
Starting Policy Manager: ok
Starting Data Transport Link Layer: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting Client Troubleshooting Service: ok
Starting Certificate Database: Initializing Curl Globally..
ok
Starting VPN Services: ok
Starting Management Frame Protection: ok
Starting DNS Services: ok
ok
Starting Redundancy: ok
Start rmgrPingTask: ok
Starting LWAPP: ok
Starting CAPWAP: ok
Starting LOCP: ok
Starting Security Services: ok
Starting OpenDNS Services: ok
Starting Policy Manager: ok
Starting Authentication Engine: ok
Starting Mobility Management: ok
Starting Capwap Ping Component: ok
Starting AVC Services: ok
Starting AVC Flex Services: ok
Starting Virtual AP Services: ok
Starting AireWave Director: ok
Starting Network Time Services: ok
Starting Cisco Discovery Protocol: ok
Starting Broadcast Services: ok
Starting Logging Services: ok
Starting DHCP Server: ok
Starting IDS Signature Manager: ok
Starting RFID Tag Tracking: ok
Starting RF Profiles: ok
Starting Power Supply and Fan Status Monitoring Service: ok
Starting Mesh Services: ok
Starting TSM: ok
Starting CIDS Services: ok
Starting Ethernet-over-IP: ok
Starting DTLS server: enabled in CAPWAP
Starting CleanAir: ok
Starting WIPS: ok
Starting SSHPM LSC PROV LIST: ok
Starting RRC Services: ok
Starting SXP Services: ok
Starting Alarm Services: ok
Starting FMC HS: ok
Starting IPv6 Services: ok
Starting Config Sync Manager : ok
Starting Hotspot Services: ok
Starting Tunnel Services New: ok
Starting PMIP Services: ok
Starting Portal Server Services: ok
Starting mDNS Services: ok
Starting Management Services:
Web Server: CLI: Secure Web: Web Authentication Certificate not found (error). If you cannot access management interface via HTTPS please reconfigure Virtual Interface.
Starting IPSec Profiles component: ok
Starting CPU ACL Logging services: ok

Enabling Controller Provisioning
Configuring Service Port
Starting DHCP day 0 task
Starting Internal DHCP server
dhcp pool 192.168.1.3(0xc0a80103) - 192.168.1.14(0xc0a8010e), network 192.168.1.0(0xc0a80100) netmask 255.255.255.240(0xfffffff0), default gateway 192.168.1.1

Enable Service port dhcp server setup on 1
(Cisco Controller)


Welcome to the Cisco Wizard Configuration Tool
Use the "-" character to backup


Would you like to terminate autoinstall? [yes]:

発送詳細

**落札当日および土曜・日曜・祝日は発送いたしません**
お急ぎの方はご遠慮ください。

お知らせ
年末年始やＧＷ・急用などの休日は当方の
自己紹介にて更新しております。
事前にご確認のほどよろしくお願いいたします。

■ゆうパック
[ 埼玉 ] (埼玉)
[北海道] (北海道)
[ 東北 ] (青森、岩手、秋田、山形、宮城、福島)
[ 関東 ] (茨城、栃木、群馬、千葉、東京、神奈川、山梨)
[ 信越 ] (新潟、長野)
[ 北陸 ] (富山、石川、福井)
[ 東海 ] (静岡、愛知、岐阜、三重)
[ 近畿 ] (滋賀、京都、大阪、兵庫、奈良、和歌山)
[ 日本 ] (鳥取、岡山、島根、広島、山口)
[ 四国 ] (香川、徳島、愛媛、高知)
[ 九州 ] (福岡、佐賀、大分、熊本、長崎、宮崎、鹿児島)
[ 沖縄 ] (沖縄)
支払方法
■!かんたん決済
こちらの商品案内は 「■@即売くん5.10■」 で作成されました。

この他にも出品しておりますので宜しければご覧ください。